PU Elastomer

  • PU Elastomer
  • Mould Resin
  • Other Product
TDI Type Property Products
PTMEG Impact, abrasion and chemical resistance E90A (L-100,90A),E95A (L-167,95A)
E75D (L-325,75D)
Polyester Solvent and oil resistance High abrasion and tear resistance RN-3039
(82A,Adjust hardness to Shore 10A with TCPP)
Liquid Curative Property
AH-33 Contain MOCA(Eq 280),AH33 imparts slightly less hardness, but improves flex resistance and low temperature properties
AH-40 MOCA - free(Eq 133.3),faster reaction for production
AH-50 MOCA - free(Eq 90),longer gel time,slightly less hardness
Two Part (AB) Room Temperature Cure
Low toxicity ( Free MOCA,Free TDI,Free Mercury ) Shore 10A ~ Shore 70Dhore 70D
UV resistance,Non-yellowing (DC60A,DC80A,DC95A,DC90D)
More Products Description
Adhesive/ Primer Metal vs RT cure PU (Primer) , Metal vs Heat cure PU (Primer) ,
Thinner,PVC vs PU (Primer) , Rubber/PU vs PU (Primer)
Repair Material Repair PU and Rubber
Foam High performance PU foam
Spray Elastomer Abrasion Resistant Spray PU Elastomer
Release Agent ERALEASE
Pigment For PU and Epoxy

Contact for more information.

Type Function Description
Temporary Mould Resin Small quantity production
  • UL94 V-0 Flame resistance
  • Low cost,Fast demold time
  • Non-yellowing
  • High temperature resistance (1760 ℃ ) Ceramic (#510)
Tipping Resin To make a mould
  • MOCA free ,PU mold resin ( Shore A 40 ~ D 70)
  • MOCA free, PU mold resin,Replace Silicone ( Shore A 10 ~ 60)
  • EPOXY hard mould resin ( Shore D 85 ~ 93)
  • High temperature resistance ( 200 ℃ ) Silicone mould resin (#580)

Contact for more information.

Type Description Product
Repairing Adhesive For Iron, Steel and Stainless Steel #2400(1093 ℃), #657(204 ℃)
For Aluminum #1000(760 ℃), #568(204 ℃)
Adhesive To bond rigid substrates K-22,45,230
Cyanoacrylate Adhesive Low whitening JC-26
Release Agent - ERALEASE
Pigment Red、Black、Blue、White and so on -
Protection Coating - #634 ( 850~1800 ℃ )
Heat Insulating Board Reduce heat loss, Control temperature HT-200

Contact for more information.